Offgridtec 5m 4mm² professional connection cable solar module to solar charge controller

This 2-wire solar cable professionally connects the solar charge controller to the solar modules in a solar system. On the module side the cable has original Multi-Contact MC4 plugs and the cable ends are cut on the charge controller side for easy removal of the sheath and exposure of the bare wire. The cable can be connected to any charge controller with the appropriate mount (min. 4mm²). Most 12V modules feature via MC-4 connector. If your module has other connectors, see in the appropriate adapters in our shop.

Due to the cross-section, cables with 4mm² from a length of 5m are only suitable for 24V systems and upwards. For 12V you should use at least 6mm².

Length: 5m

All components were crimped with professional tools and have a optimal connection quality. The processed solar cable comes from the manufacturer Lapp-Kabel and is a top branded product.

Features solar cable
- 4mm cable cross-section
- double insulated
- very flexible
- VDE 0295 class 5 and IEC 6022
- resistant to: UV, ozone, weather, water
- Very resistant to chemicals and oil - Fire-resistant according to VDE 0482-332-2, DIN

Features MC-4 male & female
- Touch protection, unplugged IP2X
- Degree of protection, IP67 when plugged in
- Operating temperature range -40° ...90° C
- Insulation material PA
- Snap-in locking system
- Cable strain relief according to IEC 61984
- Contact system MC contact lamellae
- Contact material copper, tinned
- Flame class UL94-V0
- Protection class II
- System voltage up to 1000V